Methyl cellulose (MC)

Methyl cellulose (MC)

EFP-001

Cotton-wooly, grayish-white.

Methyl Cellulose (MC) is an organic fiber obtained by chemical treatment of natural wood. Due to the treatment temperature is as high as 260 °C or more, under normal conditions is chemically very stable substances, not for the general solvent, acid, alkali corrosion. MC produced by our company using natural raw materials is green and environmentally friendly, does not affect the environment, is harmless to the human body, is conducive to environmental protection, and does not cause public harm.

Highway do anti-skid surface layer.
Old highway maintenance, repair.
Airport construction.
Bridge decking.

Fiber length analysis. Sieving by air-punch sieving using 200Ls. Microscopic analysis.
Impurity content of fibers. Expressed by residual ash after high temperature combustion.
Oil absorption test. This is the most critical indicator of fiber performance.
PH value test of fiber solution.
Water content test.
Relative density of fiber.
X-ray, infrared spectrum analyzer and nuclear magnetic resonance analysis.

High specific surface area for better binding properties. Strong compression strength, insoluble in water.

Banded and curved, uneven, porous, and flattened at intersections. Forms a three-dimensional network in the asphalt, impeding the flow of the asphalt.

Road fiber with acidic aggregate, neutral aggregate good adsorption, and can be very good with asphalt, mineral powder, a small amount of fine aggregate composition of asphalt horseshoe grease binding material, wrapped in the surface of the coarse aggregate, so that the coarse aggregate has a good embedded extrusion, in the case of not needing to add any stabilizers to achieve the resistance to low-temperature deformation and to improve the adhesion with the minerals, thus comprehensively improving the use of asphalt pavement performance. It can fully meet the performance requirements of SMA pavement.